Mikrotik L2tp Server Setup Full //top\\ 【Easy】

VPN clients need IP addresses from your local network range. Create a dedicated pool to avoid conflicts with DHCP leases.

A MikroTik router with a public IP address (static IP is preferred, but Dynamic DNS can be used). Winbox or WebFig access. RouterOS version 6 or 7. Step 1: Create an IP Address Pool mikrotik l2tp server setup full

Have you migrated to WireGuard yet, or do you still rely on L2TP? Drop your experiences in the comments below! VPN clients need IP addresses from your local network range

Enter a strong (Pre-Shared Key), for example: SuperSecretKey123! . Click OK . CLI Command: Winbox or WebFig access

/ip ipsec peer add address=0.0.0.0/0 secret=YourStrongPreSharedKey generate-policy=port-override exchange-mode=main-l2tp send-initial-contact=yes

Navigate to > Firewall > Filter Rules tab, click + , and add the following four rules. Ensure these rules are placed above any drop rules in your firewall list. 1. Allow UDP Port 1701 (L2TP traffic) Chain : input Protocol : udp Dst. Port : 1701 Action : accept 2. Allow UDP Port 500 (IPsec IKE) Chain : input Protocol : udp Dst. Port : 500 Action : accept 3. Allow UDP Port 4500 (IPsec NAT-Traversal) Chain : input Protocol : udp Dst. Port : 4500 Action : accept