: Before flashing any new firmware, it is highly recommended to dump your current SPI flash using the FEL mode method so you can revert if the update fails.
Enhanced control over the built-in signal generator (SG). Pre-requisites for Installation dso2512g firmware install
: Check your current version in the menu (Menu -> DMM -> long press CH1 button). Firmware versions (e.g., V1.3.0C or V2.0.5-III) may not be compatible across different hardware versions. Installation Steps Open the Tool : Launch the Upgrade_Tools_V1.x.x.EXE Configure Settings Change the language to in the top-left menu (usually the third option). Set the "Chip" type to Select Firmware : Before flashing any new firmware, it is
Your DSO2512G should still be on, showing the upgrade screen. Now, press and click the "Power" button , then immediately click the "OK" button to confirm the update. The device will process the firmware file. Do not touch or power off the device during this process. Firmware versions (e
If the USB drive does not appear, try a different USB cable or USB port on your computer.
oscilloscope, you must use a Windows PC and the specific "WM Upgrade Tools" associated with its Winner Micro W80x architecture.
Never unplug the cable or power down the device during the flashing process. Required Tools and Prerequisites