For standard, 80mm-wide receipts (often features an automatic cutter). Step 5: Configure the Port (Crucial Step) The installer will prompt you to assign a port.
user wants a comprehensive guide on downloading and installing v11301exe POS printer driver setup. I need to provide direct driver info, download/installation instructions, and actionable tips. My search plan includes multiple queries to cover the main aspects. I will start with the broadest search for the driver and then narrow down to specific instructions, compatibility, and security. search results did not find a direct match for "v11301exe". The user might be referring to a generic or genericized driver. The results show many POS driver options from major brands like Epson, Star, Zebra, and Toshiba. I should provide a comprehensive guide that covers various drivers and installation methods. I will open some of the more relevant-looking results to gather detailed information. search results contain a wealth of general information on POS printer drivers, OPOS, installation steps, and troubleshooting. However, no direct match for the specific file name "v11301exe" was found. My response will address this by clarifying the likely version, providing a comprehensive guide on downloading and installing POS printer drivers, and covering alternative driver types, step-by-step instructions, troubleshooting, security tips, and a concluding summary. I will structure the article with an introduction, sections on understanding POS drivers, a top manufacturers download table, preparation steps, installation guide, OPOS drivers, troubleshooting, security, and a conclusion. The Ultimate POS Printer Driver Setup Guide: v11301exe Download and Installation pos printer driver setup v11301exe download top
Step-by-Step Guide: Installing the POS Printer Driver (v11301.exe) Follow these steps to ensure a clean installation. 1. Preparation I need to provide direct driver info, download/installation
If the setup prompts you, choose your exact model from the list (e.g., Epson TM-T88V). If unsure, select "Generic ESC/POS Printer" – the v11301 driver is compatible with 90% of receipt printers. search results did not find a direct match for "v11301exe"
Ensure your printer is and connected to your computer via USB. Close all active POS software. 2. Download and Run
The combination of Ubuntu, IntelliJ, Maven, Jetty and JRebel enables really quick web app development in Java.
Ubuntu. Feel handicapped when forced to use dumbdowned Windows at work.
Maven. A build system with flaws but still better than most, and especially important as it is used by most projects.
IntelliJ IDEA. An IDE with many ingenious little tricks to make development speedier and feels very comfortable to use. At work my IDE is often either Eclipse on some projects as it often is the company standard, or NetBeans when work refuse to buy IntelliJ licenses. But with some clients and at home with my FOSS license I am much more productive with IntelliJ.
Jetty. A standalone java web application server. It is quick and very light. The Maven plugin for it makes it easy to bundle and launch locally. It also then allows for very swift development cycles.
JRebel. JRebel (Née JavaRebel) reloads java classes dynamically and allows even swifter development cycles, by negating the need to ever redeploy. This saves a lot of time, thus money, and improves quality with quicker feedback loops.
And I need these tools to work together seamlessly.
I will assume you have a normal version of Ubuntu Desktop installed. This guide was based upon Ubuntu 10.04 lucid lynx.
A normal java based webapp project buildt with maven that are using the jetty plugin is assumed to be checked out on your machine. If you do not have one set up, you can read up on java, maven & jetty and clone an example app of mine.
sudo aptitude install sun-java6-jdk
In case of other Java JDK are installed, choose Sun's flavour
sudo update-alternatives --config java
sudo update-alternatives --config javac
Environment variables
sudo vi /etc/profile.d/java.sh
export JAVA_HOME=/usr/lib/jvm/java-6-sun
export JDK_HOME=/usr/lib/jvm/java-6-sun
sudo chmod +x /etc/profile.d/java.sh
Your choice: either install via Ubuntu package repository or download the full Maven directly. The repository version depends on a load of unneccesary packages such as gjc, Ant etc. So most people recommend using the apache.org dowload instead.
For this howto I will utilise the repository version, but the only difference afterwards is the path. (You may try and restrict the installation of optional packages...)
sudo aptitude install maven2
If you prefer the downloaded archive then do this instead:
tar xzf apache-maven-2.2.1.tar.gz;
sudo mkdir /opt/apache;
sudo mv apache-maven-2.2.1 /opt/apache/maven-2.2.1;
cd /opt/apache;
sudo ln -s maven-2.2.1 maven;
And refer to /opt/apache/maven instead of /usr/share/maven2 in the paths below.
Some programs depend on different environment variables for Maven.
Also the default memory assignment is very low so you may optionally add it.
sudo vi /etc/profile.d/maven.sh
export MAVEN_HOME=/usr/share/maven2
export M2_HOME=/usr/share/maven2
#export MAVEN_OPTS=-Xms128M -Xmx512M -XX:MaxPermSize=256m
#export MAVEN_OPTS=-noverify -javaagent:$JREBEL_HOME/jrebel.jar
sudo chmod +x /etc/profile.d/maven.sh
Depending on your project you may need to configure the default maven settings,
such as any mirrors you use, passwords, other repositories, profiles etc.
But that is out of scope of this document.
mkdir ~/.m2;
vi ~/.m2/settings.xml
Because of maven dependency characteristics it is wise to do an initial a simple clean & build of your application do download all the dependencies, and the special go-offline goal. Remember to include any potential profiles if they have dependencies. ( -P profile1,profile2....)
This may take a while.... But you only have to do it once (ish..)
cd /path/to/your/project,
mvn clean;
# Wait a little while....
mvn dependency:go-offline;
# Wait a long while....
mvn install;
# Wait a longer while....
mvn jetty:run;
# Wait a longish while....
When ready kill Jetty with ^C (As in ctrl+c)
Remember from now on you should mostly do append -o parameter (offline) to speed up builds.
You need to obtain a license to run JRebel.
You can use the trial version for 30 days. (Its worth it)
Note: ZeroTurnaround do offer free licenses for open source developers.
Download the generic JAR installer
cd /tmp;
unzip ~/Downloads/jrebel-*-setup.zip;
sudo -jar jrebel/jrebel-setup.zip
I tend to choose /opt/ZeroTurnaround/JRebel as my install path, but the default it /usr/local/ZeroTurnaround/Jrebel.
If the installer doesn't trigger the configuration, or you want to reconfigure:
sudo /opt/ZeroTurnaround/JRebel/bin/jrebel-config.sh
sudo vi /etc/profile.d/maven.sh
And then uncomment or add the MAVEN_OPTS line:
export MAVEN_OPTS="-noverify -javaagent:/opt/ZeroTurnaround/JRebel/jrebel.jar $MAVEN_OPTS"
sudo mkdir /var/log/jrebel;
sudo chown jrebel:jrebel /var/log/jrebel
sudo vi /etc/profile.d/jrebel.sh
export JREBEL_HOME=/opt/ZeroTurnaround/JRebel
sudo chmod +x /etc/profile.d/jrebel.sh
Decide which version you want. I will assume a trial of the ultimate edition.
Note: JetBrains do offer free licenses for IntelliJ Ultimate for open source developers.
Go to JetBrains IntelliJ download page, and download the most recent version.
Like JRebel I prefer /opt/jetbrains as my install location. You may prefer directly in /opt or in /usr/local, etc.
cd /tmp;
tar xzf ~/Downloads/ideaIU-10.0.1.tar.gz;
sudo chown -R root:root idea-IU-99.32;
sudo mkdir /opt/jetbrains;
sudo mv idea-IU-99.32 /opt/jetbrains/;
sudo cd /opt/jetbrains;
sudo ln -s idea--IU-99.32 idea;
On first launch IntelliJ will ask you a series of questions regarding plugins etc.
Choose maven plugin amongst others.
Open settings via File/Settings/maven and enter Maven home directory as /usr/share/maven2
IntelliJ does not support Compile-on-save / Auto-build.
This feature is essential to get the best time saving from using JRebel.
So you will have to manually enter ctrl++shift+F9 to compile your file, or just ctrl+F9 to build your whole project.
A decent work around is to map ctrl+s as the build command.
Another is to install a plugin called Eclipse Mode, which auto build like eclipse.
(I have not been able to get this to work as expected)