:
Move the jumper cap from to Pins 2-3 (Clear CMOS Mode) . Wait 15 seconds. Return the jumper cap to Pins 1-2 . Plug in the power cord and boot the machine. Power Supply Unit (PSU) Requirements The RC415T-AM uses standard ATX power connections: rc415t-am motherboard manual
The front panel connector pins connect the computer case buttons and lights to the motherboard. : Toggles the system on and off. Reset Switch (RST_SW) : Reboots the system. : Move the jumper cap from to Pins 2-3 (Clear CMOS Mode)