Fu 10 Night Crawling Fixed ~repack~

Here’s a snippet of the fixed code’s revised core loop:

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Headlights not working | Loose magnetic LED harness | Reseat or replace harness | | Flickering lights | Damaged wiring connection | Solder or replace LED assembly | | Won't shift into low gear | Shift servo endpoint misadjusted | Recalibrate shift endpoints | | Grinding noise when shifting | Damaged shift linkage/gears | Inspect linkage; rebuild transmission | | Lurches/stalls at low speed | ESC calibration or low battery | Recalibrate ESC; use fresh LiPo | | Motor cuts out after 10 min | Overheating | Add heat sink & fan; reduce load | | No throttle response | Receiver disconnected or ESC failed | Re-bind; test ESC with known-good motor | fu 10 night crawling fixed

: Start a new game or load a save. Use the in-game console command settime 22 to jump to night. Then enter prone/crawl mode. Your movement should be smooth, and no errors should appear. Here’s a snippet of the fixed code’s revised