Chevron Digital — Timer Ew-32 User Manual

Note: Make sure the days selected for OFF match the days selected for ON. Setting Additional Programs

The LCD screen will flash, and all settings will be cleared. Step 3: Setting the Current Time Hold down the button. While holding CLOCK , press WEEK to set the correct day. While holding CLOCK , press HOUR to set the hour. While holding CLOCK , press MIN to set the minutes. Release the CLOCK button when finished. 4. Programming the Timer (Step-by-Step) The Chevron Digital Timer EW-32 Go to product viewer dialog for this item. chevron digital timer ew-32 user manual

Press the DAY and HOUR buttons simultaneously while in AUTO mode. A "TIMER" or "RND" icon will flash on the display. Note: Make sure the days selected for OFF

The internal NiMH battery might be deeply discharged. Leave the unit plugged into a wall outlet for up to 24 hours. If it remains blank, use a pin to press the button while it is plugged into the wall. While holding CLOCK , press WEEK to set the correct day

Do not cover or bury the timer behind heavy curtains, furniture, or rugs while it is in operation. 7. Troubleshooting Common Problems The LCD screen is completely blank. Cause: The internal backup battery is fully drained.

To toggle between standard 12-hour (AM/PM) and 24-hour time formats, press and hold the button, then press the PROG button simultaneously. Daylight Saving Time (DST) Mode